The LXB-U balustrade railing lines the opening in the attic floor. It is available in one universal size, 30”x54” and is compatible with all attic ladders.
LXL trim provides a clean finish around the installed attic ladder. The LXL-W trim is made of wood and is painted white. The LXL-PVC trim is made of PVC and does not require installation hardware.
Available in standard size 30”x54”.
Compatible with attic ladder models LWN, LWP, LWT, LWF, OWM, and LMS.
FAKRO LXS ladder ends finish the look of FAKRO wooden attic ladders. The LXS add stability and protect delicate floors. Compatible with attic ladder models LWN, LWP, and are included with models LWT and LWF.
The LXH handrail makes using the attic ladder easier and safer. It installs on either or both sides of the top segment of the ladder. Compatible with attic ladder models LWN, LWP, LWT, LWF, OWM, and LMS.
The LXN box extension is made of wood to match the frame of the attic ladder. It extends the attic ladder's frame for a finished look inside the ceiling opening and is required with the LST when installing the LXW-B upper hatch.
The piston-assisted LXW-B acts as a cover for the attic ladder when it is closed and as a cover for the opening in the attic floor when the attic ladder is open. The upper hatch is sealed with a gasket increasing the insulation value of the attic ladder and protecting from attic dust and debris. Compatible with FAKRO attic ladder models LWN, LWP, LWT, LWF, OWM, LMS, and LST. For the LST model, the LXN-B frame extension should be installed prior to the upper hatch.
The LXT additional tread installs between the attic ladder’s last tread and the floor of the attic. It makes stepping into the attic easier and safer, especially when there is a large space between the last step of the attic ladder and the attic floor. The standard width of the LXT additional tread is 11 7/8 inches. Compatible with three-section folding attic ladder models LWN, LWP, OWM and LMS.
The LXK installation brackets help with quick installation in the ceiling. The brackets support the attic ladder on all four corners and adjust to fit the attic ladder flush with the ceiling. Compatible with all attic ladders and are included with models LST and LSF.
The LXI insulated door replaces the particle board door included with the LWN non-insulated attic ladder. This replacement is insulated and sealed and increases the thermal properties of the LWN attic ladder. The replacement door consists of an insulated lid, perimeter seal, control rod and trim.
To increase the length of the LST ladder you can use an extra step:
LSS-38 for size 27/31,
LSS-31 for sizes: 22/31, 22/47, 22/54, 25/47, 25/54.
To increase the length of the LSF ladder you can use an extra step:
LSS-30 for size 22/47,
LSS-32 for size 25/47.
|Ladder balustrade LXB-U||+||+||+||+||+||+||+||+||+|
|Metal handrail LXH||+||+||+||+||+||+||-||-||-|
|Installation brackets LXK||+||+||+||+||+||+||-||-||-|
|Wooden trim LXL-W||+||+||+||+||+||+||-||-||-|
|PVC trim LXL-PVC||-||+||+||+||-||+||-||-||-|
|Plastic ends LXS||+||+||+||+||-||-||-||-||-|
|Box extension LXN-B||+||+||+||+||+||+||+||+||-|
|Upper hatch LXW-B||+||+||+||+||+||+||+||+1||-|
|Additional step LXT||+||+||-||-||+||+||-||-||-|
|Insulated Door Replacement LXI||+||-||-||-||-||-||-||-||-|
1 for the LST model ladder, the extension box should be installed prior to the upper hatch.
|Monday||8AM - 4PM|
|Tuesday||8AM - 4PM|
|Wednesday||8AM - 4PM|
|Thursday||8AM - 4PM|
|Friday||8AM - 4PM|
| FAKRO America, LLC. |
39 W Factory Rd,
Addison, IL 60101